Table of Contents
Advertisement
Chapter 1 Basic Operation
Using Fanfold Paper
When using fanfold paper, observe the following precautions:
Important
• The top surface of the fanfold paper stack must be lower than the level at which paper is set in the
printer.
• Place the fanfold paper stack so that it is not fed to the printer in an oblique direction.
Front
22
Rear feeder slot
90°
Feeding direction
150 mm (5.9 inch)
700 mm (27.6 inch)
Fanfold Paper
within100 mm
(3.9 inch)
Advertisement
Table of Contents
Troubleshooting
