Table of Contents
Advertisement
Check Point
Is the computer's configuration
for suspend or sleep state set to
something other than "Never"?
Is "no ink" displayed even
though an ink tank with
remaining ink is set?
Are the port settings correct?
Solution
Selecting "Never" in the Microsoft Windows Power Saver or
Power Option settings will prevent the computer from entering a
sleep state. Refer to Microsoft Windows product documentation
for instructions on adjusting your computer's power settings.
(
P.34)
→
Reinstall the ink tank.
(
→
Follow the steps below to confirm the port settings:
1. Open the properties window of the printer driver.
2. Click on the [Ports] tab and confirm that the port is correctly
selected.
e.g.) For USB connection:
USBnnn ("nnn" represents numbers)
For network connection: CFTnnnnnn@MDL
("n" represents the last six digits of the printer's Mac
address, and MDL is the printer's model name.)
If the setting is incorrect, set it correctly.
If the port to be used is not available, uninstall the printer driver
and install the printer driver again.
3. Click [OK].
For Troubleshooting Operations
P.180)
(
P.42)
→
217
Advertisement
Table of Contents
Troubleshooting
