Operation Panel
[8]
[7]
1
Power key/lamp
[
]
Press this key to turn on/off the printer.
This lamp lights up or blinks depending
on the power supply status.
On:
The printer is powered.
Blink: The printer is in sleep mode
(power-saving mode).
Off:
The printer is not powered.
2
Pause key
[
]
Pressing this key suspends printing.
Pressing this key restarts printing.
3
FEED key
[
]
Press to feed paper by 1 page. Pressing
and holding this key continuously feeds
paper.
[1]
[2]
(
P.13)
→
Printer Part Names and Functions
[3]
[4]
[6]
[5]
4
BACK FEED key
[
]
Pressing this key feeds paper one page
backward. Pressing and holding this key
continuously feeds the paper backwards.
The possible back feed length is 300 mm
(11.81 inch) or less (accumulated total) *.
* When the auto cutter is installed, it is
330 mm (12.99 inch) or less (accumulated
total).
5
Ink warning lamp (Bk/C/M/Y)
[
]
These lamps indicate the remaining
amounts of Black (Bk), Cyan (C), Magenta
(M) and Yellow (Y) inks.
Lit:
There is no ink available for
printing or the ink tank is faulty.
Blink: The ink tank is low.
Off:
The ink tank is full.
(
P.187)
→
7