Canon LX-P5510 User Manual page 235

Error Message
Paper Length different X
("X" represents number)
Paper Width different
Paper jam XX
("XX" represents numbers)
Gap/Mark length difference
X
List of Error Messages/Warning Messages
Error Content
The length of the paper that is
set differs from the paper size
configured by the application
software or printer driver.
The width of the paper that is
set differs from the paper size
configured by the application
software or printer driver.
The transport area, rear feeder
slot, or paper delivery slot is
clogged with paper.
The gap/mark length of the
set paper differs from the gap/
mark length of the paper size
set by the application software
or printer driver.
Handling
If the paper is different, replace
with the proper paper.
If the application software or
printer driver's configuration
is different, click on the Status
Monitor's [Cancel Print Job]
and print again after correctly
configuring the paper size.
If the paper is different, replace
with the proper paper.
If wrong paper is loaded or the
paper guide is out of position,
replace with correct paper or
move the paper guide to the
correct position.
If the application software or
printer driver's configuration
is different, click on the Status
Monitor's [Cancel Print Job]
and print again after correctly
configuring the paper size.
Remove the paper jam and
reload the paper. ( P.225)
→
If the same error occurs again,
update the printer drivers and
firmware to the latest versions.
If the paper is different, replace
with the proper paper.
If the application software or
printer driver's configuration
is different, click on the Status
Monitor's [Cancel Print Job]
and print again after correctly
configuring the paper size.
231