Engine Break-In - Yamaha Vstar XVS650T 2004 Owner's Manual

Table of Contents

Advertisement

OPERATION AND IMPORTANT RIDING POINTS
NOTE:
Always shift gears at the recommended
shift points.
To decelerate
1. Apply both the front and the rear
brakes to slow the motorcycle.
2. Shift the transmission into first
gear when the motorcycle reaches
25 km/h (15.5 mi/h). If the engine is
about to stall or runs very roughly,
5
pull the clutch lever in and use the
brakes to stop the motorcycle.
3. Shift the transmission into the neu-
tral position when the motorcycle
is almost completely stopped. The
neutral indicator light should come
on.
Recommended shift points
The recommended shift points during
acceleration
and
deceleration
shown in the table below.
Shift up points:
1st → 2nd: 16 km/h (9.9 mi/h)
2nd → 3rd: 24 km/h (14.9 mi/h)
3rd → 4th: 32 km/h (19.9 mi/h)
4th → 5th: 40 km/h (24.9 mi/h)
Shift down points:
EAU16700
5th → 4th: 25 km/h (15.5 mi/h)
4th → 3rd: 25 km/h (15.5 mi/h)
3rd → 2nd: 25 km/h (15.5 mi/h)
2nd → 1st: 25 km/h (15.5 mi/h)
EAU16720
are

Engine break-in

There is never a more important period
in the life of your engine than the period
between 0 and 1600 km (1000 mi). For
this reason, you should read the follow-
ing material carefully.
Since the engine is brand new, do not
put an excessive load on it for the first
1600 km (1000 mi). The various parts in
the engine wear and polish themselves
to the correct operating clearances.
During this period, prolonged full-throt-
tle operation or any condition that might
result in engine overheating must be
avoided.
0–1000 km (0–600 mi)
Avoid prolonged operation above 1/3
throttle.
1000–1600 km (600–1000 mi)
Avoid prolonged operation above 1/2
throttle.
5-4
EAU16841
EAU17041

Advertisement

Table of Contents
loading

Table of Contents