Table of Contents
Advertisement
Figure 20: Cabling example for the HPE StoreOnce 4700 Backup system
1.
Power connectors
3.
HD SAS port on RAID controller 2
5.
P2 port on expansion shelf (connects to P1 on
adjacent expansion enclosure)
Storage shelves with HPE StoreOnce 4500 Backup
The HPE StoreOnce 4500 Backup base system contains 12 disks and has one RAID controller card. Up
to three Capacity Upgrade Kits may be connected if more storage is needed. Compatible cables are
provided with the Capacity Upgrade Kit; a longer cable to connect the expansion shelf to the server unit
and a half-meter cable for daisy-chaining subsequent shelves. Two expansion options are available: the
HPE StoreOnce 4500/4700 24TB Capacity Kit (BB881A) and the HPE StoreOnce 4500 48TB Capacity
Kit (BB909A).
When installing an additional expansion enclosure with the HPE StoreOnce 4500 Backup system, the
storage in that enclosure will not have been pre-configured and is not ready to use until storage has been
expanded.
50
Storage shelves with HPE StoreOnce 4500 Backup
2.
HD SAS port on RAID controller 1
4.
P1 port on expansion shelf (Note
how subsequent shelves may be
daisy chained)
6.
Power on button
Advertisement
Table of Contents
