Replacing Fibre Channel Cards; Vtl Over Fibre Channel; Storeonce Catalyt Over Fibre Channel - HP StoreOnce 4700 Service And Maintenance Manual

Replacing Fibre Channel cards

VTL over Fibre Channel

If using only VTL over Fibre Channel, no further configuration is required when replacing the Fibre
Channel card.

StoreOnce Catalyt over Fibre Channel

If using StoreOnce Catalyst over Fibre Channel there are replacement considerations. The World Wide
Port Name (WWPN) and World Wide Node Name (WWNN) of the StoreOnce Catalyst over Fibre Channel
device presented on a StoreOnce Fibre Channel port currently uses the WWPN / WWNN of the FC card.
StoreOnce generated WWPNs / WWNNs are not used.
Replacing the FC card will result in a new Catalyst over Fibre Channel WWPN / WWNN.
After replacing a FC card the StoreOnce user must rezone clients with the new WWPN / WWNN. The
replaced port will not be seen by clients until this rezoning is performed.
Replacing Fibre Channel cards 45