Summary of Contents for Ideal Heating LOGIC MAX HEAT H 12IE
Page 1
When replacing any part on this appliance, use only spare parts that you can be assured conform to the safety and performance specification that we require. Do not use reconditioned or copy parts that have not been clearly authorised by Ideal Heating.
Benchmark Commissioning Checklist. You can check your installer by calling Gas Safe Register direct on 0800 4085500. Ideal Heating is a member of the Benchmark scheme and fully supports the aims of the programme. Benchmark has been introduced to improve the standards of installation and commissioning of central heating systems in the UK and to encourage the regular servicing of all central heating systems to ensure safety and efficiency.
BOILER OPERATION Legend A. Central Heating Temperature Knob E. Central Heating Economy Setting B. Mode Knob RESTART Button C. Boiler Status G. Function Button D. Burner ‘on’ Indicator BOILER BOILER ºC RESTART TO START THE BOILER EFFICIENT HEATING SYSTEM OPERATION If a programmer is fitted refer to separate instructions for the The boiler is a high efficiency, condensing appliance which will programmer before continuing.
CONDENSATE DRAIN GENERAL INFORMATION This appliance is fitted with a siphonic condensate trap system MINIMUM CLEARANCES that reduces the risk of the appliance condensate from freezing. However should the condensate pipe to this appliance freeze, Clearance of 165mm above, 100mm below, 2.5mm at the sides and 450mm at the front of the boiler casing must be allowed for please follow these instructions: servicing.
POINTS FOR THE BOILER USER Note. In line with our current warranty policy we would ask that you check through the following guide to identify any problems external to the boiler prior to requesting a service engineers visit. Should the problem be found to be other than with the appliance we reserve the right to levy a charge for the visit, or for any pre-arranged visit where access is not gained by the engineer.
Page 6
NORMAL OPERATION DISPLAY CODES DESCRIPTION DISPLAY CODE ON BOILER The boiler is in standby operation awaiting either a central heating call or hot water demand. The boiler has a call for central heating but the appliance has reached the desired temperature set on the boiler.
FAULT CODES DESCRIPTION ACTION DISPLAY CODE ON BOILER 1. Check other gas appliances in the house are working to confirm a supply is present in Flame Loss the property. 2. If other appliances do not work or there are no other appliances, check the gas supply is on at the meter and/or pre payment meter has credit.