Advertisement
3. Web Control
3.1 Projector Web Control - Mail Settings (continued)
1. SMTP / POP Server
Item
Server Address *1
Port Number
*1 The text length can be up to 255 alphanumeric characters, "-", and ".".
2. Mail Address
Item
Sender E-mail Address
*1
Recipient E-mail
Address *1
*1 The text length can be up to 255 alphanumeric characters, "-", ".", "_" and "@".
NOTE
• You can confirm whether the mail settings work correctly by using the
[Send Test Mail] button. Enable Send Mail setting before clicking the [Send
Test Mail].
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
• To use a domain name to the address of the SMTP server or POP server,
setting the DNS server is necessary.
• The characters used for mail address may not be allowed depending on mail
server.
50
Configures the SMTP server address or the POP
server address.
This item can be set not only by IP address but also by
domain name.
Configures the port number of the SMTP server
or the POP server.
Configures the sender e-mail address.
Configures the e-mail address of up to five recipients.
You can also specify the [to] or [cc] for each address.
Description
Description
Advertisement
