Advertisement
3. Web Control
3.1 Projector Web Control - Network Settings (continued)
1. Simple Access Point settings
Item
IP Configuration
SSID *1
SSID Broadcast
Encryption
WPA Passphrase *2
Wireless Freq.
Bandwidth
Channel
*1 The text length can be up to 32 alphanumeric characters and symbols. Only
symbols "!"#$%&'()*+,-./:;<=>?@[\]^_'{|}~ and space" can be used.
*2 The text length can be 8 to 63 alphanumeric characters and symbols. Only
symbols "!"#$%&'()*+,-./:;<=>?@[\]^_'{|}~ and space" can be used.
(continued on next page)
44
Configures the IP Address of the projector in Simple
Access Point mode.
Subnet Mask of this mode is fixed to 255.255.255.0.
Configures SSID of Simple Access Point mode.
Switches ON/OFF of SSID Broadcast.
When this function is set to OFF, SSID of the projector
is not displayed in wireless connection list of the
device.
Selects data encryption method.
Configures WPA Passphrase.
Configures the frequency for the wireless connection.
Configures the frequency bandwidth for the wireless
connection.
If you want to get a higher link speed, change this to
40MHz or 80MHz.
NOTE
• Depending on your internet connection,
the projector may not operate with the bandwidth
you set or you may not get a higher link speed.
Selects the wireless channel.
The selectable channels are different depending on the
wireless frequency band and Bandwidth.
NOTE
• This projector uses the 5 GHz and 2.4
GHz radio frequency band, but depending on the
country or region you are in, the channels that
you can use might be limited. Please consult your
dealer for information on the usable channels.
Description
Advertisement
