Dukane 8934 Operating Manual
  1. Manuals
  2. Brands
  3. Dukane Manuals
  4. Projector
  5. 8934
  6. Operating manual

Dukane 8934 Operating Manual

Hide thumbs Also See for 8934:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Projector
8934
User's Manual (detailed)
Operating Guide – Technical
Example of PC signal
Resolution (H x V) H. frequency (kHz) V. frequency (Hz)
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 768
1280 x 800
1280 x 960
1280 x 1024
1280 x 1024
*1
1280 x 1024
1400 x 1050
1440 x 900
*1
1600 x 1200
*1) Supported except for HDMI input.
NOTE
• Be sure to check jack type, signal level, timing and resolution before connecting this
projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these modes will not be possible with
this projector.
• Depending on the input signal, full-size display may not be possible in some cases. Refer to the number of
display pixels above.
• Although the projector can display signals with resolution up to UXGA (1600x1200), the signal will be
converted to the projector's panel resolution before being displayed. The best display performance will be
achieved if the resolutions of the input signal and projector panel are identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G.
• The illustrations in this manual are for illustrative purposes. They may differ slightly from your projector.
430-8934-Tech-00
37.9
31.5
37.9
37.5
43.3
35.2
37.9
48.1
46.9
53.7
49.7
48.4
56.5
60.0
68.7
67.5
47.7
49.7
60.0
64.0
80.0
91.1
65.2
55.9
75.0
Rating
85.0
VESA
59.9
VESA
72.8
VESA
75.0
VESA
85.0
VESA
56.3
VESA
60.3
VESA
72.2
VESA
75.0
VESA
85.1
VESA
74.5
60.0
VESA
70.1
VESA
75.0
VESA
85.0
VESA
75.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
75.0
VESA
85.0
VESA
60.0
VESA
59.9
VESA
60.0
VESA
Signal mode
TEXT
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16" mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
1152 x 864 (75Hz)
WXGA (60Hz)
1280 x 800 (60Hz)
1280 x 960 (60Hz)
SXGA (60Hz)
SXGA (75Hz)
SXGA (85Hz)
SXGA+ (60Hz)
WXGA+ (60Hz)
UXGA (60Hz)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8934 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dukane 8934

Summary of Contents for Dukane 8934

  • Page 1 Projector 8934 User's Manual (detailed) Operating Guide – Technical Example of PC signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9...
  • Page 2 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b)
  • Page 3 Connection to the ports Connection to the ports NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. COMPUTER IN1, COMPUTER IN2/MONITOR OUT D-sub 15pin mini shrink jack <Computer signal> • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) •...
  • Page 4 Connection to the ports (continued) VIDEO RCA jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL (60Hz) • 1.0±0.1Vp-p, 75Ω terminator HDMI 10 12 14 16 18 • Type :HDMI connector 11 13 15 17 19 • Audio signal : Linear PCM (Sampling rate; 32/44.1/48 kHz) Signal Signal Signal...
  • Page 5 Connection to the ports (continued) AUDIO IN AUDIO OUT RCA jack x2 RCA jack x2 • 47kΩ terminator • 1kΩ output impedance...
  • Page 6 Connection to the ports (continued) CONTROL D-sub 9pin plug 9 8 7 • About the details of RS-232C communication, 5 4 3 2 1 please refer to the next chapter. Signal Signal Signal (No connection) (No connection) Ground (No connection) (No connection) USB TYPE B USB B type jack...
  • Page 7 Connection to the ports (continued) To input component video signal to COMPUTER IN ports D-sub plug RCA plugs RCA connectors COMPONENT VIDEO OUT VCR/DVD/Blu-ray Disc player To input component video signal to the COMPUTER IN1 or COMPUTER IN2 port of the projector, use a RCA to D-sub cable or adapter. For about the pin description of the required cable or adapter, refer to the descriptions about COMPUTER IN1 or COMPUTER IN2...
  • Page 8 RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be controlled with RS-232C commands from the computer. For details of RS-232C commands, refer to RS-232C Communication / Network command table (&17). Connection Turn off the projector and the computer.

  • Page 9: Communication Settings

    RS-232C Communication (continued) Communication settings 1. Protocol 19200bps,8N1 2. Command format ("h" shows hexadecimal) Byte Number Command Header Data Header Data Setting Action Type code size flag code Packet Action <SET>Change setting to desired value [(bL)(bH)] (aL) (aH) 01h 00h (bL) (bH) (cL) (cH) by [(cL)(cH)].
  • Page 10 RS-232C Communication (continued) 3. Response code / Error code ("h" shows hexadecimal) (1) ACK reply : 06h When the projector receives the Set, Increment, Decrement or Execute command correctly, the projector changes the setting data for the specified item by [Type], and it returns the code. (2) NAK reply : 15h When the projector cannot understand the received command, the projector returns the error code.

  • Page 11: Command Control Via The Network

    Command Control via the Network Command Control via the Network When the projector connects network, the projector can be controlled with RS- 232C commands from the computer with web browser. For details of RS-232C commands, refer to RS-232C Communication / Network command table (&17).

  • Page 12: Communication Port

    Command Control via the Network (continued) Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Configure the following items form a web browser when command control is used. Port Settings Click the [Enable] check box to open [Network Control Port1 (Port: 23)] to use TCP #23.

  • Page 13: Command Control Settings

    Command Control via the Network (continued) Command control settings [TCP #23] 1. Command format Same as RS-232C communication, refer to RS-232C Communicaton command format. 2. Response code / Error code ("h" shows hexadecimal) Four of the response / error code used for TCP#23 are the same as RS-232C Communication (1)~(4).

  • Page 14: Response Code / Error Code

    Command Control via the Network (continued) 2. Response code / Error code ("h" shows hexadecimal) The connection ID is attached for the TCP#23's response / error codes are used. The connection ID is same as the sending command format. (yyh : connection ID) (1) ACK reply : 06h + yyh (2) NAK reoly : 15h + yyh (3) Error reply : 1Ch + 0000h + yyh...
  • Page 15 Network Bridge Communication Network Bridge Communication This projector is equipped with NETWORK BRIDGE function. When the projector connects to the computer by wired LAN communicaton, an external device that is connected with this projector by RS-232C communication can be controlled from the computer as a network terminal. For details, see the 3.
  • Page 16 Network Bridge Communication (continued) Communication settings For communication setting, use the OPTION - SERVICE - COMMUNICATION menu. (&OPTION menu - SERVICE - COMMUNICATION in the Operating Guide) Item Condition BAUD RATE 4800bps / 9600bps / 19200bps / 38400bps Data length 8 bit (fixed) PARITY NONE/ODD/EVEN...
  • Page 17 RS-232C Communication / Network command table RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00...
  • Page 18 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 89 D2 02 00 03 20 00 00 BRIGHTNESS Increment BE EF 06 00 EF D2 04 00 03 20 00 00 BE EF 06 00...
  • Page 19 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 C4 FE 02 00 95 30 00 00 User Gamma Point 6 Increment BE EF 06 00 A2 FE 04 00 95 30 00 00...
  • Page 20 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 40 F5 02 00 B6 30 00 00 COLOR TEMP Increment BE EF 06 00 26 F5 04 00 B6 30 00 00 OFFSET G...
  • Page 21 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 F1 82 02 00 01 21 00 00 H POSITION Increment BE EF 06 00 97 82 04 00 01 21 00 00 Decrement...
  • Page 22 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code AUTO BE EF 06 00 86 D8 01 00 22 20 00 00 NORMAL BE EF 06 00 16 D9 01 00 22 20 01 00 HDMI RANGE ENHANCED...
  • Page 23 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code COMPUTER IN1 BE EF 06 00 C2 F5 01 00 B1 20 00 00 COMPUTER IN2 BE EF 06 00 02 F7 01 00 B1 20 04 00 MONITOR OUT -...
  • Page 24 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 D9 CF 02 00 6F 20 00 00 VOLUME - STANDBY Increment BE EF 06 00 BF CF 04 00 6F 20 00 00 Decrement...
  • Page 25 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code ENGLISH BE EF 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 06 00 67 D2 01 00 05 30 01 00 DEUTSCH BE EF...
  • Page 26 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code MyScreen BE EF 06 00 FB CA 01 00 00 30 20 00 ORIGINAL BE EF 06 00 FB E2 01 00 00 30 40 00 BLUE BE EF...
  • Page 27 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code BE EF 06 00 B6 D6 01 00 16 20 00 00 AUTO SEARCH BE EF 06 00 26 D7 01 00 16 20 01 00 BE EF 06 00...
  • Page 28 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting Code COMPUTER IN1 BE EF 06 00 C6 32 01 00 01 36 00 00 COMPUTER IN2 BE EF 06 00 06 30 01 00 01 36 04 00 HDMI...

  • Page 29: Pjlink Command

    PJLink command PJLink command Commands Control Description Parameter or Response 0 = Standby POWR Power Contorol 1 = Power On 0 = Standby POWR ? Power Status inquiry 1 = Power On 2 = Cool Down 11 = COMPUTER IN 1 12 = COMPUTER IN 2 INPT Input Source selection...
  • Page 30 Projector Web Control. • For specifications of PJLink , see the web site of the Japan Business Machine and Information System Industries Association. URL: http://pjlink.jbmia.or.jp/ DUKANE CORP AV SERVICE DEPT 2900 Dukane Drive St Charles, IL 60174 800-676-2487 / 630-762-4032 Fax 630-584-5156 avservice@dukane.com...

Table of Contents