Advertisement
2. Connection to the network
2.2
Connection via wired LAN
The connection via wired LAN is available. Set wired LAN for the projector by
following the instructions of your network administrator when connecting to the
existing network.
Connection setup of wired LAN
1) Connect the projector to the computer via a hub
with a LAN cable (CAT-5e or higher).
2) Press the MENU button on the remote control or
the control panel of the projector.
The MENU you last used will appear.
Use the cursor button to select the following.
EASY MENU > ADVANCED MENU > NETWORK
> NETWORK SETUP > WIRED SETUP
3) Set the following items in WIRED SETUP.
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
DNS SERVER
As for setting an IP address, refer to About IP address. (
Select APPLY, then press the ENTER button to reflect the settings.
18
hub
19)
Advertisement
