Advertisement
2.4 NETWORK Menu
Remember that incorrect network settings on this
projector may cause trouble on the network. Be sure
to consult with your network administrator before
connecting to an existing access point on your
network.
Select "NETWORK" from the main menu to access
to the following functions.
NOTE
• The projector does not allow both wireless and wired LAN to be
connected to the same network.
• If you do not use SNTP, then you must set the DATE AND TIME during the
initial installation. (
• The network function is not available when STANDBY MODE is set to
NETWORK(WOL) or SAVING and the projector is in standby mode. Connect
the projector to the network after setting STANDBY MODE to NORMAL.
(
SETUP menu in the Operating Guide)
• When using wireless network function, set NETWORK - WIRELESS
NETWORK to ON.
OPTION menu in the Operating Guide)
2. Connection to the network
21
Advertisement
