Advertisement
9. Troubleshooting
Phenomenon: The schedule is not executed correctly.
Item to be checked
Is the projector turned on?
Is STANDBY MODE set to
NETWORK(WOL) or SAVING?
Is the time set correctly?
Is the image data to be displayed
in the schedule function
registered?
(When the event of My Image is
set.)
Is the message data to be
displayed in the schedule
function registered?
(When the event of Messenger is
set.)
Is the lamp of the projector
lighting?
Is the lamp of the projector
lighting?
Are there any events set at the
same time?
* The schedule function may not operate correctly depending on the status of the
projector.
110
Solutions
Turn on the projector.
The schedule function is not available when
STANDBY MODE is set to NETWORK(WOL)
or SAVING. If you want to use the schedule
function in the standby mode, set to NORMAL.
Check the settings of Date and Time.
Register the image data to be displayed with
the projector by using exclusive application
software.
Register the message data to be displayed with
the projector by using exclusive application
software.
The event of My Image, Messenger and Blank
are not executed when the lamp is not lighting.
Set the program of the schedule function so
that the event of MyImage, Messenger and
Blank can be executed when the lamp is
lighting.
Check the settings of Schedule Settings of the
Projector Web Control.
Some events cannot be executed at the same
time.
Set them to be executed at the different time or
change the order.
Advertisement
