Airfl Ow Direction Adjustment; 3D Auto Operation - Mitsubishi Heavy Industries SRK24YRA-W User Manual

Airfl ow direction adjustment
■ Up/down direction can be adjusted with the AIRFLOW U/D (UP/DOWN) button on the remote control. Every time you press this button
the mode changes as follows:
Change on AIRFLOW (UP/DOWN) mode.
■ Left/right direction can be adjusted with the AIRFLOW L/R (LEFT/RIGHT) button on the remote control. Every time you press this
button the mode changes as follows:
Change on AIRFLOW (LEFT/RIGHT) mode.
NOTE
• The actual position of the fl ap and louver may differ from the display shown.
MEMORY FLAP ( FLAP OR LOUVER STOPPED )
When you press the AIRFLOW (U/D or L/R) button once while the fl ap or louver is operating, it
stops swinging at the position. Since this angle is memorized in the microcomputer, the fl ap or
louver will automatically be set at this angle when the next operation is started.
• Do not expose directly to airfl ow from the air-conditioner for a long time.
• When in COOL or DRY operation, do not operate for a long period with the
airfl ow blowing straight down. Otherwise, condensation may appear on the
outlet grill and drip down.
• Do not try to adjust the fl aps and louvers by hand, as the control angle may
change or the fl ap or louver may not be closed completely.

3D AUTO operation

■ Fan speed and air fl ow direction are automatically controlled, allowing the entire room to be effi ciently conditioned.
(Flap stopped)
(Louver stopped)
(Swing)
WARNING
CAUTION
1
Press the ON/OFF button.
2
Press the 3D AUTO button.
Each time the 3D AUTO button is pressed, the display is switched in the
order of:
Releasing procedure
Press the 3D AUTO button to turn off the 3D AUTO display.
NOTE
• 3D AUTO operation is canceled when you switch the operation mode.
• If 3D AUTO operation is cancelled then the air fl ow direction changes to
that used before 3D AUTO was set.
• 3D AUTO operation can be set in COOL operation mode only.
– 15 –
• Recommended angle of the flap when
stopping
COOL, DRY
(3D AUTO)
(Swing)
(Horizontal
blowing)
No display
(Normal operation)