Operation And Display Section For Remote Control - Mitsubishi Heavy Industries SRK24YRA-W User Manual

Operation and display section for remote control

OPERATION MODE select button
Each time the button is pressed, the
mode changes.
Page 13
TEMPERATURE button
This button sets the room temperature.
HI/ECO button
This button changes the HIGH POWER/
ECONOMY operation.
Page 23
AIR FLOW (LEFT/RIGHT) button
This button changes the air fl ow (left/
right) direction.
Page 15
SILENT button
This button changes the SILENT
operation.
Page 24
ON TIMER button
This button selects ON TIMER operation.
Page 17
OFF TIMER button
This button selects OFF TIMER
operation.
Page 16
WEEKLY button
This button switches the WEEKLY
TIMER to ON/OFF.
Page 19
CLEAN switch
This switch selects the CLEAN
operation.
Page 25
SLEEP button
This button selects SLEEP operation.
Page 16
Display in OFF status
The current time, day of the week,
and present OPERATING MODE are
displayed while the air-conditioner is
turned off.
[View with the cover opened]
• The above illustration shows all controls, but in
practice only the relevant parts are shown.
Transmission procedure
When each button on the remote control is
pressed – with the remote control pointing
towards the air-conditioner unit, a signal is
transmitted.
When the air-conditioner receives the signal
correctly, it will beep.
– 12 –
Transmission section
ON/OFF (luminous) button
Press to start operation, press again
to stop.
FAN SPEED button
Each time the button is pressed, the fan
speed changes.
Page 14
AIR FLOW (UP/DOWN) button
This button changes the air fl ow (up/
down) direction.
Page 15
3D AUTO button
This button sets 3D AUTO operation.
Page 15
SET/Child Lock button
Use this button to set the timer and
Child Lock.
Page 10
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
TIMER button
This button is used for setting the current
time and timer function.
PROGRAM button
This button sets WEEKLY TIMER.
Page 19
ACL switch
Switch for resetting microcomputer.
Page 9
TIME SET UP switch
This switch is for setting the time.
Page 13
Reception
pip