Download Print this page

attica ATTJL01A108-BX Installation Manual

18-22 jeep wrangler jl- apex series front bumper

Advertisement

Quick Links

Before installation -
Read and understand all instructions,
warnings, cautions, and notes contained in this installation
instruction guide. Consult your vehicle owner's manual for proper
disconnection of electrical and li ting of vehicle if required for
installation of this product.
This install may require some technical skills and knowledge of basic
mechanical work. If you do not feel that you are capable of performing
this install please take this product to a trained professional.
A ter reading this guide please contact us with any questions or
concerns before installing product.
Customer Service: (626) 369-2121
ATTICA4X4 is not responsible for any bodily injury or harm to you or
your vehicle as a result of an improper install.
tech@attica4x4.com
ATTJL01A108-BX
Proper installation of this kit requires knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand
during the installation. Installation of this kit without proper
knowledge of the factory recommended procedures may a ect the
performance of these components and the safety of the vehicle.
Always wear eye protection when operating power tools.
Inspect all contents of this package to make sure product is not damaged and all
installation hardware has been included. If parts are missing from kit, please be
prepared to provide the following information:
Name of purchase location
Bar Code on side of box
Date above Bar Code
Date insde box cover
(626) 369-2121

Advertisement

loading
Need help?

Need help?

Do you have a question about the ATTJL01A108-BX and is the answer not in the manual?

Questions and answers

Summary of Contents for attica ATTJL01A108-BX

  • Page 1 ATTJL01A108-BX Before installation - Proper installation of this kit requires knowledge of the factory Read and understand all instructions, recommended procedures for removal and installation of original warnings, cautions, and notes contained in this installation equipment components. We recommend that the factory shop manual instruction guide.
  • Page 2: Tools Required

    tools required • 13mm socket • 16mm socket • 16mm wrench • 5mm hex tool hardw are kit N15 | Nut W19 | Washer W22 | Lockwasher b19 | bolt SPARE PARTS HARDWARE KIT B57 | n14 | nut W23 | Washer 13942 VALLEY BLVD, CITY OF INDUSTRY, CA 91746 TECH@ATTICA4X4.COM 626-369-2121...
  • Page 3 CAUTION | For this installation we suggest having an extra pair of hands to help out. Begin by unpacking all items and inspecting them for damage or missing items. Any concerns, please contact the company you purchased the bumper from. A ter inspection, remove your factory bumper &...
  • Page 4 Align the mounting points of your bull bar with the top of your front bumper as shown above. It mounts to the front bumper using your B19 bolts, W19 washers and N14 nuts with 5mm hex tool & 13mm socket tool. Next step is to slide your winch plate into the place behind the bumper.
  • Page 5 Proceed by mounting your Attica Wrangler Apex Series Front Bumper on your vehicle. Once mounted, secure and fasten your D-Ring hooks on each side of the front bumper. Fasten with B57 bolts, W23 washers, W22 lockwashers & N15 nuts from behind the bumper with 16mm socket tool &...
  • Page 6 Refer to image shown on right to see how your hardware is used to install the D-Ring hooks to your bumper. Mount your winch into your front bumper as shown to the le t and you are ready to go! 13942 VALLEY BLVD, CITY OF INDUSTRY, CA 91746 TECH@ATTICA4X4.COM 626-369-2121...
  • Page 7 if you have any questions, please email us at tech@attica4x4.com or call us at 626-369-2121 (626) 369-2121 tech@attica4x4.com...