Download Print this page

attica Terra Series Installation Manual

Jeep wrangler jl side steps

Advertisement

Quick Links

18-23
terra Series side steps
Before installation -
Read and understand all instructions,
warnings, cautions, and notes contained in this installation
instruction guide. Consult your vehicle owner's manual for proper
disconnection of electrical and li ting of vehicle if required for
installation of this product.
This install may require some technical skills and knowledge of basic
mechanical work. If you do not feel that you are capable of performing
this install please take this product to a trained professional.
A ter reading this guide please contact us with any questions or
concerns before installing product.
Customer Service: (626) 369-2121
ATTICA4X4 is not responsible for any bodily injury or harm to you or
your vehicle as a result of an improper install.
tech@attica4x4.com
Jeep Wrangler JL
ATTJL02C109-BX
Proper installation of this kit requires knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand
during the installation. Installation of this kit without proper
knowledge of the factory recommended procedures may a ect the
performance of these components and the safety of the vehicle.
Inspect all contents of this package to make sure product is not damaged and all
installation hardware has been included. If parts are missing from kit, please be
prepared to provide the following information:
Always wear eye protection when operating power tools.
Name of purchase location
Date above Bar Code
Bar Code on side of box
Date insde box cover
(626) 369-2121

Advertisement

loading
Need help?

Need help?

Do you have a question about the Terra Series and is the answer not in the manual?

Questions and answers

Summary of Contents for attica Terra Series

  • Page 1 18-23 Jeep Wrangler JL terra Series side steps ATTJL02C109-BX Before installation - Proper installation of this kit requires knowledge of the factory Read and understand all instructions, recommended procedures for removal and installation of original warnings, cautions, and notes contained in this installation equipment components.
  • Page 2: Tools Required

    tools required • 12mm socket • 13mm socket • 15mm socket • 16mm socket hardw are kit W22 | washer W19 | Washer W16 | washer W23 | Washer SPARE PARTS HARDWARE KIT b35 | hex head bolt n17 | Hex Flange Nut b22 | hex head bolt 13942 VALLEY BLVD, CITY OF INDUSTRY, CA 91746 TECH@ATTICA4X4.COM...
  • Page 3 Begin by unpacking all items and inspecting them for damage or missing items. Any concerns, please contact the company you purchased the side steps from. A ter inspection, remove your factory side steps. 13942 VALLEY BLVD, CITY OF INDUSTRY, CA 91746 TECH@ATTICA4X4.COM 626-369-2121 WWW.ATTICA4X4.COM...
  • Page 4 Position the threaded plate by feeding it through the hole as shown on the right. The front mount is fastened with B35 bolts and secured in place using W22 and W23 washers. These components are connected to the threaded plate using a 12mm and 16mm socket tool.
  • Page 5 This mounting point for the front, uses B22 bolts, W16 and W19 washers with a 13mm socket tool. The middle mount uses W23 washers and N17 nuts with a 15mm socket tool. 13942 VALLEY BLVD, CITY OF INDUSTRY, CA 91746 TECH@ATTICA4X4.COM 626-369-2121 WWW.ATTICA4X4.COM...
  • Page 6 13mm socket tool. The other mount employs W23 washers and N17 nuts, requiring a 15mm and a 12mm socket tool for installation. Once finished your Attica Terra Series Side Steps will be completely installed and ready to take to the outdoors! 13942 VALLEY BLVD, CITY OF INDUSTRY, CA 91746 TECH@ATTICA4X4.COM...
  • Page 7 if you have any questions, please email us at tech@attica4x4.com or call us at 626-369-2121 (626) 369-2121 tech@attica4x4.com...

This manual is also suitable for:

Attjl02c109-bx