Rimage Amigo II Hardware Manual page 4
Align the lift arm to the carousel
Hide thumbs
Also See for Amigo II:
- User manual (15 pages) ,
- Reference manual (6 pages) ,
- Setup and installation manual (4 pages)
Advertisement
Align the lift arm to the carousel
9.
Repeat step 8 until the lift arm is aligned.
Important! Ensure that the flag is still centered in the sensor.
Lift Arm
Lift Arm
Flag
Flag
Side of Unit
Producer II and AutoPrinter II
Producer III and Producer IIIN
10. Repeat steps 2 – 7 to ensure that the lift arm is aligned to each bin.
11. Select diagnostic test 19 to exit diagnostic mode. The Producer III is ready for use.
4
© 2007, Rimage Corporation
112161_B
Advertisement
