Advertisement
setup
DIS : The DIS mode can compensate for
vibration of the camera.
M
When DIS is operating, D-ZOOM does not
operate.
SYNC : Two synchronization modes are available INTERNAL and EXTERNAL
LINE-LOCK.
In LINE-LOCK mode, it synchronizes the camera's video out signal to the
external SYNC signal.
-
INT : Internal synchronization
-
LL : External line-lock synchronization
➊ If you choose 'LL', you can adjust the desired phase.
Press the Function Setup switch.
➋ You can adjust the desired phase from 0 to 359.
COMM ADJ (Communication Adjustment) :
This function sets up the camera
communication status when controlling the
camera through an external controlled device.
➊ When the SPECIAL menu screen is
displayed, using the Function Setup
switch so that the arrow indicates
'COMM ADJ'.
➋ Set up the mode moving the 4 direction
of the Function Setup switch.
-
PROTOCOL : Select the communication PROTOCOL. (SAMSUNG-T/PELCO-D/
-
CAM ID : Determines the camera's identifi cation number (between 0 and 255).
-
BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.
-
UART MODE : You can select NONE, EVEN or ODD for the parity bits.
34_ setup
PELCO-P/ BOSCH/HONEYWELL/VICON/AD/SAMSUNG-E/PANASONIC)
SPECIAL SETUP
PRIVACY
DAY/NIGHT
DIS
SYNC
COMM ADJ
IMAGE ADJ
MONITOR
DISPLAY
RETURN
COMMUNICATION SETUP
PROTOCOL
SAMSUNG-T
CAM ID
IIIIIIIIIIIIIIIIIIIIIIIIIIIII
BAUD RATE
UART MODE
RET PKT
RETURN
OFF
AUTO
OFF
INT
LCD
1
9600
8-N-1
DISABLE
Advertisement
