Advertisement
Select one of the following 5 modes, as appropriate for your purpose.
-
ATW : Select this when the color temperature is between 1,800˚K and 10,500˚K.
-
MANUAL : Select this to fi ne-tune White Balance manually. Set White Balance
fi rst by using the ATW or AWC mode. After that switch to MANUAL
mode, fi ne-tune the White Balance and then press the Function
Setup switch.
-
AWC SET : To fi nd the optimal luminance level for the current environment,
-
OUTDOOR : Select this when the color temperature is between 1,700˚K and
-
INDOOR : Select this when the color temperature is between 4,500˚K and 8,500˚K.
M
White Balance may not work properly under the following conditions. In this case select the AWC
mode.
➊ When the color temperature of the environment surrounding the subject is out of the control
range (e.g. clear sky or sunset).
➋ When the ambient illumination of the subject is dim.
➌ If the camera is directed towards a fl uorescent light or is installed in a place where
illumination changes dramatically, the White Balance operation may become unstable.
BACKLIGHT
Unlike conventional cameras, the SCO-2370 is designed to deliver a distinctive subject
and background at the same time, even when the subject is backlight, by using the
features of the proprietary W-V DSP chip.
1.
When the SETUP menu screen is displayed,
select 'BACKLIGHT' by using the Function
Setup switch so that the arrow indicates
'BACKLIGHT'.
point the camera towards a sheet of white paper and press the
Function Setup switch. If the environment changes, readjust it.
11,000˚K. (sodium light inclusion)
MAIN SETUP
SSDR
WHITE BAL
BACKLIGHT
MOTION DET
FOCUS
EXPOSURE
SPECIAL
RESET
EXIT
English_21
ON
ATW
OFF
OFF
Advertisement
