Subscribe to Our Youtube Channel
Related Manuals for Burkert EPS 21 ATEX 1 234 X
Summary of Contents for Burkert EPS 21 ATEX 1 234 X
- Page 1 EPS 21 ATEX 1 234 X, IECEx EPS 21.0078X / UL E504714 Solenoid coil Type AC10 with cable plug Type 2509 or Type 2513 Device with II 3G/D Ex approval and Hazardous Locations Zone 2/22 and Class I, II, III Div 2 Listing...
- Page 2 We reserve the right to make technical changes without notice. Technische Änderungen vorbehalten. Sous réserve de modifications techniques. © Bürkert Werke GmbH & Co. KG, 2022-2023 Operating Instructions 2304/02_EU-ML_00815422 / Original DE...
- Page 3 Type AC10, II 3G/D Ex Contents OPERATING INSTRUCTIONS ..........4 INSTALLATION AND DISASSEMBLY ........14 Terms and abbreviations ..........4 Installing the cable plug..........15 Symbols ............... 4 Electrical connection ..........15 Disassembly .............. 16 INTENDED USE ..............5 START-UP ................16 Ex approval ..............
- Page 4 Type AC10, II 3G/D Ex Operating instructions OPERATING INSTRUCTIONS Symbols The following symbols are used in these instructions. The operating instructions describe the entire life cycle of the device. Keep these instructions in a location which is easily accessible to DANGER! every user, and make them available to every new owner of the device.
- Page 5 Bürkert. 86842 Türkheim Variants with UL listing are only authorised for Type 2509 Type AC10 solenoid with Type EPS 21 ATEX 1 234 X cable plugs. II 3G Ex ec IIC T4 Gc 2509 or Type 2513 cable plug ▶...
- Page 6 Type AC10, II 3G/D Ex Intended use UL approval Applied Standards for Hazardous Locations Zone 2/22 and Class I, II, The UL approval is only valid if you use the modules and com- III Div. 2 Listing ponents authorised by Bürkert as described in these operating instructions.
- Page 7 Type AC10, II 3G/D Ex Basic safety instructions BASIC SAFETY INSTRUCTIONS CNL - Canada Listed certification in accordance with CSA C22.2 NO. 139 These safety instructions do not take into account any CSA C22.2 EXPLOSIVE ATMOSPHERES Edition 4 – unforeseen circumstances and events which occur during instal- No 60079-0 - PART 0: EQUIPMENT - Issue Date...
- Page 8 Type AC10, II 3G/D Ex Basic safety instructions ▶ Observe applicable safety regulations (as well as national safety regulations), as well as the general rules for the tech- nology during setup and operation. Risk of explosion. ▶ Repairs may only be carried out by the manufacturer. Solenoids and valve bodies form a closed system after instal- ▶...
- Page 9 If multiple sole- printed operating instructions. noids are installed in one valve block: They are also available online at: country.burkert.com ▶ Prevent mutual heating by using a suitable distance. Warranty A precondition for the warranty is that the Type AC10 solenoid is used as intended in consideration of the specified application conditions.
- Page 10 Type AC10, II 3G/D Ex Operational conditions of the devices Operating conditions WARNING! The valve fulfils a cooling function for the solenoid. Hazard due to electrostatic discharge. The solenoid must not be operated without a valve. The valve If there is a sudden discharge of electrostatically charged body must meet the following prerequisites: devices or people, there is a risk of explosion in the Ex area.
- Page 11 Type AC10, II 3G/D Ex Technical data TECHNICAL DATA Standards and directives The device complies with the relevant EU harmonisation leg- Safety instructions islation. In addition, the device also complies with the require- ments of the laws of the United Kingdom. DANGER! The harmonised standards that have been applied for the con- formity assessment procedure are listed in the current version of...
- Page 12 Type AC10 solenoid with example valve and the type label positions: Information on special operating conditions ATEX, identification of EPS 21 ATEX 1 234 X the Ex protection for the II 3G Ex ec IIC T4 Gc solenoid II 3D Ex tc IIIC T135°C Dc...
- Page 13 Type AC10, II 3G/D Ex Technical data Type label for the USA/CA Item Description Details Hazardous Locations area 1 Ex labelling in accordance Cl I, Zn 2, AEx ec IIC T4 Gc with zone concept (US and Zn 22, AEx tc IIIC T135°C Dc CA separately) Ex ec IIC T4 Gc Ex tc IIIC T135°C Dc...
- Page 14 Type AC10, II 3G/D Ex Installation and disassembly Electrical data for solenoids INSTALLATION AND DISASSEMBLY Code Struc- Temperature Ambient Nominal Nominal DANGER! tural class temperature voltage [V] power width range [°C] Risk of injury due to high pressure in the system or device. [mm] ▶...
- Page 15 If there is a sudden discharge of electrostatically charged devices each cable plug and/or online at: country.burkert.com or people, there is a risk of explosion in the Ex area. searching for 2509 or 2513.
- Page 16 Type AC10, II 3G/D Ex Start-up Disassembly START-UP WARNING! DANGER! Risk of injury due to improper operation. Risk of injury due to high pressure in the system or device. Improper operation may result in injuries as well as damage to ▶...
- Page 17 → the device is installed according to regulations, and dispose of them as special waste. → the connection has been properly made, Further information country.burkert.com. → the device is not damaged, → voltage and pressure have been applied, → the pipelines are free, →...
- Page 19 country.burkert.com...
Need help?
Do you have a question about the EPS 21 ATEX 1 234 X and is the answer not in the manual?
Questions and answers