Setting Up The Network Configuration - Ricoh IS100 Quick Manual

Setting up the Network Configuration

To set up the Network configuration
1. Click the Network tab on the Configuration dialog box. The Network
Configuration will display.
2. Chang the Network Configuration as necessary.
3. Click Apply to save the change or OK to save and leave the IS100e
Configuration window.
About the Network Configuration
¡
Use the following IP address: Enter the "IP address", "Subnet mask", and
"Gateway" of the scanner.
¡
DNS Server: Enter the IP address of your DNS server.
¡
NTP Server: Enter the IP address of your NTP server.
¡
Server IP Address: Enter the IP address for the SMTP server, SMTP port, or
POP3 server.
¡
Enable DHCP: Click to enable DHCP.
Chapter 8 Configuring the IS100e
53