Pentair MagicFlame 580165 Installation And User Manual page 6

5
INSTALLATION GUIDELINES
•
Minimum 15 GPM [56.8 LPM] flow for water features.
•
If the pool has multiple lights, water features, etc., it is recommended that the fire/water features be run
independent of each other, using a separate transformer for each group or type of water feature.
Otherwise all water features connected to the same transformer will operate together.
• 3/4" hose adapter needed to connect fire/water bowl to water line.
• 1-1/2" water supply line recommended.
• Install a check valve in the water supply line to prevent bowl from draining when not in use.
• Install an adjustable control valve in the water supply line to allow water flow adjustments.
• Install the bowl so that the water is flowing into the pool, spa, or fountain.
• Spillover scupper must be no less than 3 inches [7.6 cm] over finished edge of pool, spa coping or fountain
pedestal.
• Separate bond wire required for each bowl.
• Ensure the fire feature has a way to drain water. Providing proper drainage is critical.
• If installing the fire feature on a column, ensure the bowl is anchored properly.
• Ensure the electrical and gas line hole is sealed to prevent water cannot penetrating the coping surface under the
bowl.
MAGICFLAME™ Fire and Water Bowl Installation and User' s Guide
(continued)