Table of Contents
Advertisement
RISK OF FIRE OR EXPLOSION! Improper installation can result in flammable gas leaks, which could result in death, serious
injury, or major property damage. Installation must be performed by a qualified service professional or gas supplier.
RISK OF CARBON MONOXIDE POISONING OR ASPHYXIATION! This product can produce carbon monoxide, a tasteless
and odorless toxic gas. Improper installation may lead to a buildup of carbon monoxide, which can result in death, permanent
brain damage, or other serious injury. Installation must be performed by a qualified service professional or gas supplier.
NEVER install or operate this product in an enclosed space where carbon monoxide can accumulate.
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION!
only available for 12 VAC power. For supply connections, use only an isolating low voltage power supply with ungrounded
output, evaluated and listed by a Nationally Recognized Testing Laboratory (NRTL).
Follow the instructions given in this manual to ensure proper installation, operation and maintenance of your
MagicFlame™ Fire and Water Bowl. Failure to follow these instructions may void the product warranty.
For additional information, or if you have questions regarding these instructions, contact Pentair Technical Service at
(800) 831-7133.
FEATURE OVERVIEW
• Water fountain bowl and/or electronic ignition gas burner.
• 12 VAC low voltage power supply.
• Durable UV-resistant glass fiber reinforced concrete bowl.
• 85,000 BTU rating.
• Low voltage (60 W maximum) and minimal water flow requirements.
• Capable of use with natural gas or propane.
• (*) Burner assemblies are certified to ANSI Z21.97-2017/ CSA 2.41-2017
- Outdoor Decorative Gas Appliances.
INSTALLATION GUIDELINES
IMPORTANT! The fire feature is shipped from the manufacturer for use natural gas at the manufacturer. If conversion
to propane is required, it must be performed by a qualified service professional or gas supplier using Pentair
specified and approved parts.
For conversion instructions refer to REPLACING THE PILOT ORIFICE, page 17 and REPLACING THE BURNER
ORIFICE, page 19.
•
Installation must be in accordance with all local codes and/or the latest edition of the National Fuel Gas Code,
ANSI Z223.1 and the latest edition of the National Electrical Code, NFPA 70 (US).
Note: In Canada, installation must be in accordance with the latest CAN/CGA-B149.1 or .2 and CSA C22.1
Canadian Electric Code, part 1.
•
Provide a minimum of 6 ft [1.8 m] clearance above the burner.
•
Provide a minimum of 4 ft [1.2 m] horizontal clearance between the fire feature and any combustible surfaces or
objects.
•
Ensure install location provides proper drainage.
•
Properly anchor to a solid mounting surface.
•
Ensure all openings at base and burner area are unobstructed.
•
Mounting surface must be level in all directions.
•
Electrical power, gas and water outlets should be located in the center of the bowl.
Improper installation could result in serious injury. This product is
- Continue to next page -
MAGICFLAME™ Fire and Water Bowl Installation and User' s Guide
INSTALLATION
Certified to ANSI Z21.97-2017/
CSA 2.41-2017 - Outdoor
Decorative Gas Appliances*
4
Advertisement
Table of Contents
