Cisco 6825 Quick Start Manual page 2

3. Press Transfer Press Transfer before or after the
coworker answers.
Consult and Transfer a Call
(Consult Transfer)
Before you transfer a call, you can talk to the person that
you're transferring the call to.
Ensure you have an active call that needs to be transferred.
1. Put an active call on hold by pressing Hold.
2. Enter the other person's phone number and press
New Call.
3. (Optional) When the other person answers, you can
talk to them.
4. After the consultation, press Transfer to complete
your call transfer.
Add a Contact
1. Press Recents and highlight the recent caller.
2. Press More, highlight Save as Contact, and press
Select.
3. Highlight the category, press Select, and press Save
to save the number.
4. (Optional) Highlight a field to add or replace other
information.
5. Press Save and press Yes.
Call a Local Contact
1. Press Contacts and highlight an entry.
2. (Optional) Press the right on the Navigation ring
to select an alternate number.
3. Press Call.
Call a Directory Contact
1. Press Directory.
Copyright © 2023 Cisco Systems, Inc. All rights reserved.
Cisco IP DECT 6825 Handset Quick Start Guide
2. Scroll down to highlight an entry, or press Search,
enter a name, and press Search.
3. Press Line and select a line to call on.
4. Press Select.
View Your Recent Calls
1. Press Recents.
2. Press the Navigation ring
different lists.
Use Push to Talk
1. Press and hold Mute
2. Talk when connected and release Mute at the end of
your message.
Assign a Speed-Dial Number
1. Press Menu
2. Highlight a contact.
3. Press More and select Speed Dial.
4. To reuse an existing speed-dial index entry, highlight a
number, press Delete
5. Highlight an empty speed-dial index and press Add.
6. Press Power/End
Access Your Voicemail
Press and hold One
1.
ringtone.
2. Follow the voice prompts.
left or right to view
.
> Contacts or Contacts:
and press Yes.
.
until you hear the
Change the Volume on a Call
While on a call, press Volume
Set Do Not Disturb
1. Press Menu .
2. Select Settings > Do not disturb.
3. Select Disabled (default) to turn off DND or select
Enabled to turn on DND.
4. Press Select to save the setting.
Set the Coverage Warning
1. Press Menu .
2. Select Settings > Audio Settings.
3. Highlight Coverage warning.
4. Press Off to stop the tone or press On to play the tone.
User Guide
View the full User Guide at https://www.cisco.com/c/en/
us/support/collaboration-endpoints/ip-dect-6800-series-
multiplatform-firmware/products-user-guide-list.html.
Cisco and the Cisco logo are trademarks or registered trademarks of
Cisco and/or its affiliates in the U.S. and other countries. To view a list
of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.
Third-party trademarks mentioned are the property of their respective
owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
up or down.
September 2020