Setting Up A Client Computer - Ricoh AP4510 Printing Manual

Setting Up a Client Computer

This section describes the procedures for setting up a client in a network that
uses Windows 2000, Windows NT Server or Windows NT Workstation as a
print server.
When using a Windows 2000 or Windows NT print server, select a shared print-
er on Windows 2000 or Windows NT.
Windows 2000
Limitation
❒ When using a print server connected to the printer with Ridoc IO Navi, you
cannot use Recovery Printing.
Note
❒ This section assumes that the client has already been configured to communi-
cate with a Windows 2000 or Windows NT print server. Do not begin the fol-
lowing procedure until the client has been set up and configured correctly.
Use the [Printers] window to set up the printer.
A A A A
Click [Start], point to [Settings] and then click [Printers].
B B B B
Double-click the [Add Printer] icon.
This launches the Add Printer Wizard.
C C C C
Click [Next >].
D D D D
Click [Network printer], and then click [Next >].
E E E E
Click [Next >].
F F F F
In the [Shared printers:] box, double-click the name of the computer used as
a print server.
The printers attached to the network are displayed.
Windows 2000 or
Windows NT Print Server
Setting Up a Client Computer
2
23