CipherLab RS36 User Manual page 45

Terminal Emulator User Guide
ALARM
VT ALARM
Featured settings on Alarm are as follows:
Setting
Control Reader By
Command
Note: ReaderConfig is an application developed by CipherLab to manage the barcode reader
integrated on the mobile computer.
40
Description
Enable the host service to send commands in order to turn on/off the reader
module. Deselected by default.
Enable Command: Assign a command (escape sequence) for turning

on the reader module.
Disable Command: Assign a command (escape sequence) for

turning off the reader module.
You can also refer to Beeper/Vibrator settings in ReaderConfig
the mobile computer sound or vibrate each time the reader module is
enabled/disabled by the given command.
Setting Description
Sound Tap to select a sound from the pop-up list
or tap the User Defined radio button to
locate a wav file.
Sound File When User Defined is selected in the
Name Sound setting, tap it to locate a wav file to
play each time the reader module is
enabled/disabled by the given command.
Vibration Select the amount of time to vibrate each
Duration time the reader module is
enabled/disabled by the given command.
1
to make
Default
Mute
--
0 sec