VT OR TN SETTINGS
Tap Emulator Type to bring up the Host Type selection menu. Select one of the radio buttons to
determine a host type including TN 5250, TN 3270, VT 100, VT 102, VT 220, and ANSI.
Whether VT or TN is selected, the settings include the following connection profile options:
Item
Host Profile
Auto Connect
Description
Set the type of the host to connect. Options are:
VT
TN
Following settings are inside the group box of Host.
Item
Description
IP
Assign the IP address or host
name of the host to connect.
Port
Assign the port to connect to
the host.
Enable Terminal Emulator to auto-connect to the assigned host
upon its launch.
Default
192.168.1.100
23
(telnet port)
4 Settings
Default
VT
Deselected
(Disabled)
33