CipherLab RS36 User Manual page 41

Terminal Emulator User Guide
For example: Users specify the "%m%n%o%p%q%r-%a.%b.%c.%d-%s-%t"
string. The mobile device will send "0017231BABF9-192.168.241.65-1-vt220"
(0017231BABF9 representing MAC address, 192.168.241.65 representing IP
address, 1 representing the TE session number, and vt220 representing the
terminal ID) to VT Server when receiving ENQ from the host.
Server Assign the character code for displaying the characters received from
Language the server.
Replace Char if When "UTF-8" is assigned in Server Language, this control bar is
Unconvertable available. Swipe it from left to right and tap to assign a replacement
character.
If the characters received from the server are unconvertable, a
replacement will be displayed on the terminal. Options are:

TN SETTINGS
Setting
Server Language
WorkStation ID
36
(Blank), X, %, &, ≠, -, _
Description
Assign the character code for displaying the characters
received from the server.
Specify a string less than 10 characters to be sent to the host
when receiving an ENQ from the host. Users can include the
variables as follows for device identification:
Variables
%m%n%o%p%q%r
%a%b%c%d
%s
%t
Description
depict six octets of the MAC
address
depict four octets of the IP address
depict the TE session number
depict the Terminal ID (TN
Emulators)
US-ASCII
Deselected
(Disabled)
(Blank)
Default
IBM-037,
IBMLatin-1
EBCDIC
--