Page 10
Eco dMEV+ Centrifugal Extract Fan use of the appliance The Eco dMEV+ extract fan range is in a safe way and un- manufactured to the highest stan- dards of production and quality as derstand the hazards laid down by the international Quality Standard ISO 9001.
Page 11
Remove the front grille (1) and the Constant SW dip switch protection cover (2). volume position The unit can be mounted on the wall or ceiling using the 4 raw plugs and the screws provided. Ensure that there are no obstructions to the airfl...
Page 12
ECO DMEV+ T operates continuously on the trickle setting speed. When the humidity lev- This model is provided with an adjus- el in the room is higher than the set table over-run timer. The timer allows level the fan will boost to high speed. the fan to continue to operate for the When the humidity drops below the selected period after the switch has...
Page 13
Waste Management mains supply before carrying out any Plant at the end of its servicable life. maintenance. The Eco dMEV+ extract fan is supplied EnviroVent reserves the right to alter speci- fi cations without notice. with a plastic fi lter.
Page 14
The Eco dMEV+ products are covered by a two year warranty, subject to the specifi ed maintenance stated within this booklet. If your fan has been supplied and installed by EnviroVent it is covered with a full parts and labour warranty. If you detect a fault, please con- tact us on 01423 810 810.
Page 16
EnviroVent Ltd Harrogate West Business Park Unit 1 Bardner Bank Killinghall Harrogate HG3 2SP 01423 810 810 info@envirovent.com www.envirovent.com Ref. 9023025210...
Need help?
Do you have a question about the Eco dMEV+ and is the answer not in the manual?
Questions and answers