Advertisement
STEP TWO, CONT...
Hold the thin tube bend with your thumb and finger as
shown. Gently insert the dome into your ear canal.
Using your finger, position the stabilizer into the curvature
of your ear. The stabilizer helps keep the aid secure in your ear.
STEP TWO, CONT...
Place hearing aid behind your ear.
Turn hearing aid on.
If hearing aid is off, press and hold the lower button for 3 seconds
until the hearing aid turns on.
3
STEP THREE
Make Adjustments to Your
Hearing Aid Using the Upper
and Lower Button
UPPER BUTTON
Press & Hold
Quick Press
CHANGE PROGRAM
VOLUME INCREASE
seconds
LOWER BUTTON
Press & Hold
Quick Press
TURN ON & OFF
VOLUME DECREASE
seconds
4
STEP FOUR
Remove Hearing Aid
Grasp thin tube bend at the entrance of the ear canal.
Gently pull thin tube out of ear, removing dome from ear.
Remove hearing aid from behind the ear.
Wipe dome clean from any wax, oils, moisture, etc.
Power aid off. Place aid in charging case when not in use.
Tip: To avoid feedback/chirping when aid is being
removed, turn aid off prior to removal.
Advertisement
