Subscribe to Our Youtube Channel
Related Manuals for arcelik 10120 M
Summary of Contents for arcelik 10120 M
- Page 1 Washing Machine User Manual 10120 M - 10120 MA Document Number: 2820530265_EN/ 09-05-22.(16:02)
-
Page 2: General Safety Instructions
1 General safety instructions • Do not force open the locked loading door. The door will This section includes security open immediately after the instructions which may help prevent washing cycle has ended. If the the injuries and material damage risks. door does not open, apply the All kinds of warranties shall be invalid if solutions provided for “Loading... -
Page 3: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used room where the product is by children at and above 8 located. years old and by persons •... -
Page 4: Important Instructions For Environment
This product has been manufactured with high DANGER quality parts and materials which can be reused and are suitable for recycling. Do not dispose • Do not wash the product by of the waste product with normal domestic spraying or pouring water onto and other wastes at the end of its service life. -
Page 5: Technical Specifications
4 Technical specifications Arçelik Arçelik Supplier name or trademark 10120 M 10120 MA Model name 7148247800 7129250100 Rated capacity (kg) 1200 1200 Maximum spin speed (rpm) Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet •... -
Page 6: Appropriate Installation Location
4.1 Installation • Leaving a gap at the sides of the machine is suggested to reduce vibration and noise INFORMATION • On a graduated floor, do not place the product next to the edge or on a platform. • Your washing machine automatically •... -
Page 7: Connecting Water Supply
4.1.4 Connecting water supply INFORMATION • It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher. CAUTION! •... -
Page 8: Adjusting The Feet
4.1.6 Adjusting the feet 4.1.8 Initial use Before starting to CAUTION! use the product • In order to ensure that the product make sure that operates more silently and vibration- the preparations free, it must stand level and balanced are made which on its feet. - Page 9 4.2 Preparation 4.2.3 Tips for energy and water saving Following information will help you use the 4.2.1 Sorting the laundry product in an ecological and energy/water- • Sort laundry according to type of fabric, efficient manner. colour, and degree of soiling and allowable •...
-
Page 10: Using Detergent And Softener
4.2.6 Using detergent and softener • When washing dark coloured clothes and quilts, it is recommended to use liquid detergent. INFORMATION • Wash woollens at suggested programme • When using detergent, softener, starch, with special detergent made specifically for fabric dye, bleach and descaling agents; woollens read the manufacturer’s instructions written •... - Page 11 Using liquid detergents • If the gel detergent thickness is not fluidal or in the shape of capsule liquid tablet, put it If the product contains a liquid detergent cup: directly into the drum before washing. • Put the liquid detergent container into the •...
-
Page 12: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woollens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling based on soiling 40-90 oC) cold-40 oC) level: cold -40 oC) -
Page 13: Operating The Product
4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 6 - Auxiliary Function Button 3 7 - Auxiliary Function Button 2 8 - Auxiliary Function Button 1 9 - Spin Speed Adjustment Button... - Page 14 • : Selectable * : Automatically selected, cannot be cancelled. ***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/A11:2020 and energy label with Commission Delegated Regulation (EU) 2019/2014 - : See the programme description for maximum load. INFORMATION •...
-
Page 15: Main Programmes
4.3.5 Main programmes Hijyen+ ( Hygiene+) • Depending on the type of fabric, use the Applying a steam step at the beginning of the following main programmes. programme allows to soften the dirt easily. • Pamuklu (Cottons) Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc. - Page 16 Karma (Mix 40) • CAUTION! You can use this programme to wash cottons and synthetics together without the need to sort them. • Do not use the washing machine to wash materials such as carpets, rugs etc. Otherwise, permanent • Gömlek (Shirts) damage will occur to the machine.
- Page 17 4.3.7 Special programmes Rinse hold If you are not going to unload your clothes For specific applications, select any of the immediately after the programme ends, you can use following programmes. rinse hold function to keep your laundry in the final •...
- Page 18 4.3.10.1 Auxiliary functions INFORMATION Ön Yıkama (Prewash) • • This is not a washing programme. A Prewash is only worthwhile for heavily soiled It is a maintenance programme. laundry. Not using the Prewash will save • Do not run this programme when there are energy, water, detergent and time.
- Page 19 Changing the delayed end time • AntiCrease+ If you want to change the time during countdown: If you press and hold the auxiliary function button Turn the programme selection knob to cancel the 3 for 3 seconds, this function will be selected delayed end time function, and then set the desired and the programme follow-up light of the relevant time again.
-
Page 20: Loading Door Lock
You can change the auxiliary functions, speed and temperature settings without stopping the programme flow while the programme is running. To do this, the change you are going to make must be something that will be carried out after the programme step that is running. If the change is not suitable, relevant lights will flash 3 times. -
Page 21: Cancelling The Programme
Changing the auxiliary function, speed and 4.3.17 End of programme temperature At the end of the programme, “End” will be displayed. Depending on the step the programme has reached, you can cancel or select auxiliary 1. Wait until the light of the loading door goes functions. -
Page 22: Maintenance And Cleaning
4.4 Maintenance and cleaning INFORMATION Service life of product extends and frequently • Foreign metal substances will cause experienced problems will be reduced if it is rust stains in the drum. Clean the cleaned at regular intervals. stains on the drum surface by using 4.4.1 Cleaning the detergent drawer cleaning agents for stainless steel. -
Page 23: Draining Remaining Water And Cleaning The Pump Filter
4.4.5 Draining remaining water 3 Follow the below procedures in order to drain water. and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric The product does not have an emergency fibres clogging the pump impeller during water drain hose, in order to drain the water: discharge of washing water. -
Page 24: Troubleshooting
5 Troubleshooting Programmes do not start after the loading door is closed. Loading door cannot be opened. • Start / Pause / Cancel button is not pressed. >>>Press • Loading door lock is activated because of the water level in Start / Pause / Cancel button. - Page 25 Product does not switch to spinning step. (*) Colour of the clothes faded. (**) • There is unbalanced load in the product. >>>Automatic • Excessive laundry was loaded in. >>>Do not load the unbalanced load detection system is activated due to the product in excess.
- Page 26 • The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent compartment are blocked. >>>Check the holes and clean if they are clogged. • There is a problem with the detergent drawer valves. >>>Call the Authorised Service Agent.
- Page 27 Moreover, to ensure product safety and to prevent risk of serious injury, the mentioned self-repair shall be done following the instructions in the user manual for self-repair or which are available in https://www.arcelik.com.tr/destek. For your safety, unplug the product before attempting any self-repair.
Need help?
Do you have a question about the 10120 M and is the answer not in the manual?
Questions and answers