Fujitsu DL7400 Maintenance Manual page 72

(28) LF Motor removal and installation
Removal
1. Remove the upper cover.
2. Remove the printer mechanism assembly.
3. Remove the idle gear
4. Remove the screws fixing lf motor
5. Remove the LF motor from inside of side frame.
Installation
1. Install the LF motor by reversing the removal procedure.
Screws
Figure 4.44 LF motor removal and installation
Note
LF bracket needs adjustment. Putting the mark
before disassembly is gives aim to adjustment for
assembly.
LF Motor
Idle Gear
72