Fujitsu DL7400 Maintenance Manual page 38

4.7 Parts That must not be Disassembled
This section gives the locations of parts that must not be disassembled. Table 4.2 lists components not to be
disassembled and whose mounting screws are not to be loosened or removed.
Parts not to be Disassembled
No. Components
1 Frames (L) and (R)
2 Space motor
3 Print head
4 Upper Angle
5 Card Guide
Upper stay screws
Rear stay screws
Upper Angle
Front stay screws
Figure 4.2 Parts That must not be disassembled
Parts
All screws
All screws and pulleys
3 screws
2 screws
Print head
Card Guide
Space motor pulley
38
Remark
Gage for Adjustment
is necessary