Hdmi Out Video Considerations; Garmin Chartplotter - Garmin GPSMAP 12x3 Owner's Manual

HDMI Out Video Considerations

To prevent corrosion due to moisture, you must use Garmin GPSMAP accessory cables when connecting the
chartplotter to the video display. Using different cables voids your warranty.
The GPSMAP 12x3 chartplotter models have HDMI out capability to duplicate the chartplotter screen on another
device, such as a television or monitor.
The Garmin GPSMAP HDMI accessory cable is 4.5 m (15 ft.) long. If you need a longer cable, you should use an
active HDMI cable only. You need an HDMI coupler to connect the two HDMI cables.
You must make all cable connections in a dry environment.
Item Description
GPSMAP 12x3 chartplotter
GPSMAP HDMI cable (HDMI OUT)
Display with an HDMI In port, such as a computer or television
Dry environment, protected from moisture
Pairing the GC 100 Camera with a Garmin Chartplotter
™
Before you can connect a wireless device to the chartplotter wireless network, you must configure the
chartplotter Wi‑Fi network
1 With the camera within an unobstructed 76 m (250 ft.) of the chartplotter, quickly press
2 On the chartplotter, select Settings > Communications > Wireless Devices > Garmin Camera > Start.
3 Follow the on-screen instructions.
Viewing Video
(Setting Up the Wi‑Fi Network,
NOTICE
page 24).
three times.
163