Carrier 40MBAA Installation Instructions Manual page 7

4. Remove the drain pan support bracket and the locking clip.
Remove the filter plate
Fig. 11 — Remove the Support Bracket and Clip
5. Remove the pipe temperature sensor and room temperature sensor.
Pipe Temperature
Sensor
Fig. 12 — Pipe and room temperature sensors
6. Remove the evaporator and drain pan assembly.
Take out the evaporator
and rotate it 180°
Fig. 13 — Rotate the evaporator
7. Rotate the evaporator 180°.
IM-40MBAA-02
Clip
Bracket
Room Temperature
Sensor
Specifications subject to change without notice.
8. Reinstall the evaporator and drain pan assembly.
Fig. 14 — Reinstall the evaporator and drain pan
assembly
9. Reinstall the pipe temperature sensor in its original position. Attach
the room temperature sensor to the evaporator output pipe
.
protection sleeve
Pipe temperature cable and room
temperature cable pass through the
top of the water intake plate and
the left side plate.
Wiring position
of the pipe
temperature sensor
Fig. 15 — Reinstall the Pipe Temperature Sensor
10. Reinstall the drain pan support bracket and locking clip.
Fig. 16 — Reinstall the Drain Pan Fixed Plate
Wiring position of
the room
temperature
sensor
7