4
Install the following components:
a
System board shield
b
Back cover
c
Stand
5
Follow the procedure in
Solid State Drive -SSD
Removing the SSD card
1
Follow the procedure in
2
Remove the following components:
a
Stand
b
Back cover
c
System board shield
3
Remove the screw (M2) that secures the SSD card to the system board [1].
4
Slide and remove the SSD card from the card slot on the system board [2].
5
Remove the thermal pad [3].
NOTE:
M.2 PCIe SSD with capacity over 512G(512G/1TB/2TB) must be installed with a thermal pad. M.2 SATA SSD and M.
2 PCIe SSD with 128G and 256G does not require a thermal pad.
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
33