Table of Contents
Advertisement
Available languages
Available languages
4.10 Auxiliary function selection
Select the required auxiliary functions before starting
the program. Furthermore, you may also select or
cancel auxiliary functions that are suitable to the
running programme without pressing the Start /
Pause button when the machine is operating. For this,
the machine must be in a step before the auxiliary
function you are going to select or cancel.
If the auxiliary function cannot be selected or
canceled, light of the relevant auxiliary function will
blink 3 times to warn the user.
C
Some functions cannot be selected together. For
example, Prewash and Quick Wash.
If a second auxiliary function conflicting with the
first one is selected before starting the machine,
the function selected first will be cancelled and the
second auxiliary function selection will remain active.
For example, if you want to select Quick Wash after
you have selected the Prewash, Prewash will be
cancelled and Quick Wash will remain active.
Auxiliary function that is not compatible with the
program cannot be selected. (See "Programme and
consumption table")
Auxiliary Function buttons may vary according to the
model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
C
Prewash without detergent is recommended for
tulle and curtains.
• Quick Wash
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times for lightly
soiled laundries and also the number of rinsing steps.
C
When you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
Delayed Start (In some models only)
With the Delayed Start function the startup of the
programme may be delayed up to 3, 6 or 9 hours.
C
Do not use liquid detergents when you set Delayed
Start! There is the risk of staining of the clothes.
Open the loading door, place the laundry and put
detergent, etc. Select the washing programme,
temperature, spin speed and, if required, the auxiliary
functions. Set the desired time by pressing the
Delayed Start button. When the button is pressed
once, 3 hours delayed start is selected. When the same
button is pressed again, 6 hours delay is selected, and
when it is pressed for the third time, 9 hours delayed
start is selected. If you press the Delayed Start button
once again, Delayed Start function will be canceled.
Press Start / Pause button. Previous delayed start time
light turns off and next delayed start time light turns
on after every 3 hours. At the end of the countdown,
all delayed start lights will turn off and the selected
14 / EN
programme will start.
C
Additional laundry may be loaded during the
delayed start period.
Changing the Delayed Start period
Press Delayed Start button. Every time the button is
pressed, the period will change in 3-hour increments
and the light of the selected delayed start time will
turn on.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and
start the programme immediately:
Set the Delayed Start period to zero (all delayed start
period lights will turn off) or turn the Programme
Selection knob to any programme. Thus, Delayed Start
function will be canceled. The End/Cancel light flashes
continuously. Then, select the programme you want
to run again. Press Start / Pause button to start the
programme.
4.11 Starting the programme
Press Start / Pause button to start the programme.
Programme follow-up light showing the startup of the
programme will turn on.
C
If no programme is started or no key is pressed
within 1 minute during programme selection
process, the machine will switch to Pause mode
and the illumination level of the temperature,
speed and loading door indicator lights will
decrease. Other indicator lights and indicators will
turn off. Once the Programme Selection knob is
rotated or any button is pressed, indicator lights
and indicators will turn on again.
4.12 Child Lock
Use child lock function to prevent children from
tampering with the machine. Thus you can avoid any
changes in a running programme.
C
If the Programme Selection knob is turned when
the Child Lock is active, "Con" appears on the
display. The Child Lock does not allow any change
in the programmes and the selected temperature,
speed and auxiliary functions.
C
Even if another programme is selected with the
Programme Selection knob while the Child Lock
is active, previously selected programme will
continue running.
C
When the Child Lock is active and the machine
is running, you can switch the machine to Pause
mode without deactivating the Child Lock by
turning the Programme Selection knob to On / Off
position. When you turn the Programme Selection
knob afterwards, the programme will resu
Washing Machine / User's Manual
Advertisement
Table of Contents
