Advertisement

Washing Machine
User Manual
WTE7512 B0
Document Number :
2820527104_EN/ 13-05-20.(14:28)

Advertisement

Table of Contents
loading

Summary of Contents for Beko WTE7512BO

  • Page 1 Washing Machine User Manual WTE7512 B0 Document Number : 2820527104_EN/ 13-05-20.(14:28)
  • Page 2: General Safety Instructions

    1 General safety instructions • While there is still water inside the product, never open the This section includes security loading door or remove the filter. instructions which may help prevent Otherwise, risk of flooding and the injuries and material damage risks. injury from hot water will occur.
  • Page 3: Children's Safety

    1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used by room where the product is the children who are at the located. age of 8 and over and the •...
  • Page 4: Important Instructions For Environment

    2. Important instructions for DANGER! environment • Plug the product into a 2.1 Compliance with WEEE Directive grounded outlet protected by This product complies with EU a 16 A fuse. Do not neglect to WEEE Directive (2012/19/EU). This product bears a classification have the grounding installation symbol for waste electrical and made by a qualified electrician.
  • Page 5: Technical Specifications

    4 Technical specifications Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko Model name WTE 7512 B0 Rated capacity (kg) Maximum spin speed (rpm) 1000 Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) Single Water inlet / Double Water inlet •...
  • Page 6: Appropriate Installation Location

    4.1 Installation 4.1.3 Removing the transportation locks • Apply to the nearest authorised service agent for the installation of your product. 1 Loosen all bolts with an appropriate wrench until they turn freely. • Preparation of the location and electrical, tap water and waste water installations at 2 Remove the transport safety bolts by the place of installation is under customer's...
  • Page 7: Connecting The Drain Hose To The Drain

    • In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.
  • Page 8: Electrical Connection

    4.2 Preparation 4.1.7 Electrical connection Connect the product to a grounded outlet 4.2.1 Sorting the laundry protected by a 16 A fuse. Our company shall * Sort laundry according to type of fabric, not be liable for any damages that will arise color, and degree of soiling and allowable when the product is used without grounding in water temperature.
  • Page 9 4.2.3 Things to be done 4.2.6 Using detergent and softener for energy saving INFORMATION Following information will help you use the product in an ecological and energy-efficient manner. • When using detergent, softener, starch, fabric • Operate the product in the highest dye, bleacher and decolorant, descaling capacity allowed by the programme you agents;...
  • Page 10 • Wash woolens with special detergent made • If required, clean the apparatus with water specifically for woolens. when it is in place or by removing it. • If you will use powder detergent, the CAUTION! apparatus must be secured at top position. If the product does not contain a liquid •...
  • Page 11: Tips For Efficient Washing

    • When using oxygen-based decolorant, select a program which washes the laundry at a low temperature. • Oxygen-based decolorant can be used with the detergent; however, if it is not at the same consistence, first put detergent in the compartment number “2” in the detergent dispenser and wait for the machine to flush the detergent when taking in water.
  • Page 12: Operating The Product

    4.3 Operating the product 1 - Programme Selection knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - Delayed Start Button 4 - Programme Follow-up indicator WTE 7512 B0 Hygiene Cottons Shirts Cottons Eco 5 - Start / Pause button Ready 90°...
  • Page 13: Main Programmes

    4.3.5 Main programmes Depending on the type of fabric, use the • : Selectable following main programmes. * : Automatically selected, no canceling. • Cottons ** : Water efficient programme You can wash your durable cotton laundry ***: If maximum spin speed of the machine is (sheets, bedlinen, towels, bathrobes, lower then this value, you can only select up underwear etc.) in this programme.
  • Page 14 • Cottons Eco • Mix 40 Use to wash your normally soiled, durable Use to wash your cotton and synthetic clothes cotton and linen laundry. Although it washes together without sorting them. longer than all other programmes, it provides high energy and water savings. Actual water •...
  • Page 15 4.3.7 Special programmes 4.3.9 Spin speed selection For specific applications, select any of the Whenever a new programme is selected, the following programmes. recommended spin speed of the selected programme is displayed on the spin speed • Rinse indicator. Use when you want to rinse or starch separately. To decrease the spin speed, press the Spin •...
  • Page 16: Functions/Programmes Selected By Pressing The Function Buttons For 3 Seconds

    4.3.10.2 Functions/Programmes INFORMATION Selected by Pressing the Function • If a second auxiliary function conflicting Buttons for 3 Seconds with the first one is selected before starting • Drum Cleaning the machine, the function selected first Press and hold the auxiliary function button 1 will be canceled and the second auxiliary for 3 seconds to select the programme.
  • Page 17 To deactivate the Child Lock: Changing the delayed start period Press and hold the Auxiliary Function button 2 If you want to change the time during countdown: for 3 seconds while a programme is running. 1. Press the Delayed Start button. Time will C03, C02, C01 will appear on the display increase by 1 hour each time you press the respectively while you keep the button pressed...
  • Page 18 4.3.13 Progress of programme Changing the auxiliary function, speed and temperature Progress of a running programme can be followed from the Programme Follow-up Depending on the step the programme has indicator. At the beginning of every programme reached, you can cancel or select the auxiliary step, the relevant indicator light will turn on and functions.
  • Page 19: Maintenance And Cleaning

    4.4 Maintenance and cleaning 4.3.17 End of programme “End” appears on the display at the end of the Service life of product extends and frequently programme. experienced problems will be reduced if it is 1. Wait until the loading door light illuminates cleaned at regular intervals.
  • Page 20: Cleaning The Body And Control Panel

    4.4.5 Draining remaining water INFORMATION and cleaning the pump filter The filter system in your machine prevents • Foreign metal substances will cause solid items such as buttons, coins and fabric rust stains in the drum. Clean the fibers clogging the pump impeller during stains on the drum surface by using discharge of washing water.
  • Page 21: Troubleshooting

    5 Troubleshooting 3 Follow the below procedures in order to drain water. Program does not start after closing the door. • Start / Pause / Cancel button was not pressed. >>>*Press The product does not have an emergency the Start / Pause / Cancel button. water drain hose, in order to drain the water: •...
  • Page 22 Machine directly discharges the water it takes in. Machine does not switch to spinning step. (*) • Draining hose might not be at adequate height. • There might be unbalanced load in the machine. >>>Connect the water draining hose as described in the >>>Automatic unbalanced load detection system might operation manual.
  • Page 23 Colour of the clothes faded. (**) • There is a problem with the detergent drawer valves. >>>Call the Authorised Service Agent. • Excessive laundry was loaded in. >>>Do not load the • Detergent might be mixed with the softener. >>>Do not machine in excess.

Table of Contents