Running Transducer Cable - Raymarine ST60+ Owner's Handbook Manual

18
Fixing
screws
3. Referring to the
rectly for the option you are using, then secure the wind vane base, using the
two self-tapping fixing screws.
4. Insert the wind vane arm into the wind vane base connector and tighten the
locking ring securely by hand.

Running transducer cable

Mast
Typical Wind Vane cable run
ST60+ Club House Wind Instrument Owner's Handbook
Base
Connector cap
Locking ring
Wind vane cable options
Junction box
Arm
illustration, route the cable cor-
D6836-2
+