Chapter 1: Operation
Speed over ground
Speed over ground (SOG)information is available if your ST60 Speed instrument is
part of a SeaTalk system to which a suitable GPS is also connected.
Log, trip and water temperature
The trip key gives access to log, trip and water temperature information. Refer to
Using trip key
the
Using trip key
Log
The Log screen shows the total distance covered by the vessel since the ST60
Speed instrument was fitted.
Trip
The trip distance is reset at power up and may also be reset manually, by pressing
the reset key for 3 seconds. The display shows the distance covered since the last
reset.
The trip distance can be reset only if the instrument is a master, i.e. connected to a
Note:
speed transducer.
flow diagram to access the information you want.
Log
trip
Trip distance
for 3 s to return
TRIP value to 0
trip
Water
temperature
Press
reset
trip
trip
D4364-2
3