Radar Set Up Parameters; Ebl Display - Raymarine SL72 Owner's Handbook Manual

7-12

7.4 Radar Set Up Parameters

The RADAR SET UP option allows you to set up the radar according to your
system configuration and your personal preferences.
Note: Some parameters can only be changed if you are using the Master dis-
play (that is, the display to which the scanner is connected).
The following table lists the Radar Set Up parameters and their options,
shows the factory default setting, and provides a space for you to make a
note of your new default setting. Each parameter is described in the fol-
lowing subsections.
Table 7-2:
Parameter

EBL DISPLAY

TIMED
TRANSMIT
TRANSMIT PERIOD
STANDBY PERIOD
DEFAULT MARK
SYMBOL
MARK DISPLAY
CLEAR MARKS
CUSTOM SCALE
BEARING
ALIGNMENT
ANTENNA SIZE
SEND ON HSB
EBL Display
The mode of the bearing data displayed for Electronic Bearing Lines
(EBLs). The bearing information can be displayed in either of two forms:
• Relative: The bearing relative to your vessel's heading.
• Mag/True: The actual bearing in either degrees magnetic or degrees true.
This option is only available if you are obtaining data from a compass.
If you choose this mode, the selection you made for Bearing Mode
determines whether °M or °T is displayed in the EBL data boxes. The
current units are shown for the heading value in the status bar at the top
of the screen.
SL72 & SL72RC PLUS Pathfinder Radar & Radar/Chartplotter
Radar Set Up Parameters
Options
MAG/TRUE, RELATIVE
OFF, ON
10 scans, 20 scans, 30 scans
3, 5, 10 or 15 mins
, , ,
OFF, ON
Press soft key to clear marks
database
OFF, ON,SET RANGES...
Slider value
Not valid for SL72 & SL72RC
PLUS
Not valid for SL72 & SL72RC
PLUS
Factory Default New Default
RELATIVE
OFF
20 scans
10 minutes
ON
N/A
OFF
0°
-
-