Raymarine SL70RC PLUS Series Quick Reference Card

GAIN
Not used in Chart mode.
VRM/EBL
Use to measure range and bearing to/between points.
- Position cursor at start point, and press VRM/EBL key to display the
Ruler data box. Select end point using trackpad, and press ENTER to fix
end position of ruler.
MULTI
Controls display lighting and contrast (monochrome) or brightness (color).
- Press to display sliders.
Monochrome
O
F
60%
F
LIGHT CONTRAST
Color - Press and hold MULTI key for brightness to 100%.
O
F
F
LIGHT
Select a slider using the soft key or trackpad.
Toggle between off/on by pressing the soft key again.
Adjust slider using trackpad, and press ENTER to finish.
ALARMS
Use to set up the chartplotter alarms.
- Press to display the Alarms set up menu and soft keys,
the soft keys correspond to the selected alarm.
ALARMS SET UP
ARRIVAL ALARM 0.01nm
OFF TRACK ALARM OFF
ANCHOR ALARM OFF
COUNTDOWN TIMER 00:33:00
ALARM CLOCK OFF
SELECT ARRIVAL
ALARM RADIUS
Use the trackball to select the alarm, then use the soft keys to adjust
parameters and/or toggle the alarm on/off.
Press ENTER to finish.
Quick Reference Card: SL70RC PLUS Series Chart Displays
86079_1
Chartplotter
Soft Key Labels:
Change when you press a key.
Default soft key labels are shown.
ROUTE GOTO SCREEN FIND SHIP
Soft keys
Press to select option, or slider.
Labels change when you press soft/dedicated key.
Elipses (...) after the text indicate that pressing soft key
leads to a further display of soft key options.
ENTER
Confirms selection and (if appropriate) clears current soft
key labels. It performs the selected task, accepts changes,
or displays more options.
When cursor text is displayed, takes cursor control
of the object.
When arrow-head cursor symbol is displayed, drops the
object under cursor control.
CLEAR
Cancels operation in progress and returns to the
previous display.
Deletes an object/function under cursor control.
Trackpad
Controls cursor position and the slider values.
Hold the trackpad down to move the cursor faster.
POWER
Press and hold until unit beeps to turn on display.
Press for 3 seconds to turn off display.
DISPLAY
Controls display mode and windows.
- Press for display mode and soft keys display.
- Press again to toggle through display modes, then ENTER.
- Press and hold for 2 seconds for full screen display.
Monochrome
WINDOWS SELECT
OFF ON WINDOWS
Color
WINDOWS SELECT OVERLAY
OFF ON WINDOWS OFF ON
Press soft keys to toggle window on/off and to select
lower window.
Press ENTER to finish.
MARKS / MOB
Controls waypoints, and Man Overboard function.
- Press to display waypoint soft keys.
- Press and hold for 2 seconds to activate or cancel MOB.
PLACE WPT PLACE WPT WAYPOINT LOAD/SAVE
AT CURSOR AT VESSEL LIST USER CARD
Press soft key to place waypoint at cursor or vessel, or display the
waypoint list/user card menu and asscociated soft keys.
Press ENTER to finish.
RANGE
Controls chart scale.
Displayed vertical distances shown in the Status Bar.
- Press top of key to increase the chart distance.
- Press bottom of key to decrease the chart distance.
- Press and hold to change the scale faster.
MENU
Provides access to setup options.
- Press to display soft keys.
SYSTEM CHART TRACK GPS
SET UP¬ SET UP¬ SET UP¬ SET UP¬
Press soft key to display required setup menu, then use trackpad
to select option and soft key to change option.
Press ENTER to close menu, and CLEAR to finish.
D5983-1