Raymarine SL72 Owner's Handbook Manual page 124

Chapter 5: Standard Chart Operations (SL72RC PLUS only)
You should always check the target waypoint before initiating a follow
route.
➤ To follow the current route:
1. Press the GOTO default soft key. The Goto/Follow soft keys are displayed.
2. Press the FOLLOW ROUTE soft key.
Alternatively, to follow a route:
1. Place the cursor over a route leg until the letters RTE and the route soft keys
RTE are displayed then press FOLLOW ROUTE .
Your vessel's current position becomes the origin, and the target waypoint in
the current route becomes the active target.
The soft keys change as follows:
These options are described in the following sections.
➤ To follow the current route in reverse:
1. Press the ROUTE default soft key, followed by MORE . The route soft keys
are displayed.
2. Press the REVERSE ROUTE soft key. The current route is reversed on the
screen. Press ENTER or CLEAR .
3. Press the GOTO default soft key. The Goto/Follow soft keys are displayed.
4. Press the FOLLOW ROUTE soft key.
The soft keys change as follows:
These options are described in the following sections.
Alternatively:
RTE
1. Place the cursor over the route leg until the letters RTE and the route soft
keys are displayed. Press REVERSE ROUTE then FOLLOW ROUTE .
Your vessel's current position becomes the origin, and the target waypoint in
the current route becomes the active target.
5-31
D4251_1
D4172-1