Clearing The Current Track; Managing Tracks - Raymarine SL72 Owner's Handbook Manual

5-40
Press ENTER to return to the track soft keys.
2. Press the TRACK OFF ON soft key to toggle tracks on.
Your vessels trail will be displayed on-screen, with a line joining the
points at the selected interval.

Clearing the Current Track

You can clear the current track from the screen. When you select CLEAR
TRACK , if the current track has not been saved, you have the option of saving it.
➤ To clear the current track:
1. Press the CLEAR TRACK soft key.
2. If the track has not been saved the SAVE TRACK soft keys are displayed.
To clear the track without saving it in the Track List, press NO .
To save the track in the list, press YES . The Name track soft keys are dis-
played and you should continue as described in the following section, Sav-
ing and Naming a Track.
Press CLEAR to abort the Clear Track operation.
The current track is cleared from the screen and the default soft keys are
displayed.

Managing Tracks

Although it is easy to set up a track, and this track is retained even if you switch
off your display, you can store a number of different tracks so that you can
review them at a later date. This section explains how to perform the following
tasks:
• Save and Name a track.
• Name, Erase and Show an existing track.
Saving and Naming a Track
You can save up to 5 named tracks in the Track List. These tracks can be re-
displayed at a later date.
➤ To save and name the current track:
1. Press the MORE soft key followed by the TRACK LIST soft key. The track list
pop-up and associated soft keys are displayed.
2. The next available entry on the track list is highlighted.
(If required, you can use the trackpad to select another position in the list;
this can be a blank slot, or an existing track that you no longer require).
SL72 & SL72RC PLUS Pathfinder Radar & Radar/Chartplotter
D5674-1