Storage - Silvercrest 298743 Manual

1) Remove the power plug from the socket .
2) Dismantle the appliance for cleaning . Pull the sealing ring 6 off the lid 5 .
Remove the small rubber disc located on the upper end of the blade holder 7 .
3) Clean the motor unit 3 with a moist cloth . If necessary, add a little mild deter-
gent onto the cloth . Wipe off with a cloth moistened only with clear water so
that all detergent residues are removed .
4) Clean the bowl 9, emulsifying disc w, lid 5 sealing ring 6, blade holder 7
with blade 8, the small rubber disc of the blade holder 7 and the non-slip
ring q in warm water with a little mild detergent . Rinse all the parts using
clean water to remove any detergent residues . Dry all parts well .
NOTE
Alternatively, you can clean the bowl 9, emulsifying disc w, blade holder
7 with blade 8 and the lid 5 with the sealing ring 6 in the
dishwasher . If possible, place the parts in the top basket of the
dishwasher . Ensure that the parts are not trapped in any way .
5) After cleaning, push the sealing ring 6 back onto the flange of the lid 5 .
Ensure that the flat side of the sealing ring 6 rests flat on the lid 5 .
6) Place the small rubber ring back on the upper end of the blade holder 7 .
You can now reassemble the appliance .

Storage

■ Store the cleaned appliance in a clean and dry location .
■ 12
│ GB│IE│NI│CY
SMZC 500 B2