Beko 01M-8809143200-0722-16 User Manual page 16

5 Installation of appliance
Attach the flue flaps to the plastic flue adapter in
the package content as follows. Insert the plastic
pin (Figure 10/area no. 2) on the pin socket on the
motor exhaust (Figure 10/area no.1). Then bend
the flap lightly to insert the other pin on the flap
and insert the other pin to its socket (Figure 10).
(Figure 11)
1. Air Baffle
2. Plastic Chimney
Attach the plastic chimney adapter, which is in-
cluded in the package, in the direction of the air
baffle. Lock the chimney adapter by turning it in
the direction of the arrow (Figure 11).
(Figure 12)
Assemble the air baffle group with 3.9 x 22
screws from point C, D, E, F that you have already
prepared (Figure 12).
16 / EN
1
2
(Figure 13)
1. Aluminium Air Outlet Pipe
Make the air outlet pipe assembly (Figure 13).
C
Install the chimney plates of the hood (Figure 10)
Since twists and bends in the alu-
minium pipe will lead to reduction
in the air suction power, avoid using
twists and bends as much as pos-
sible.
Cooker Hood / User Manual