Operating The Radio; Display Symbols; To Turn The Radio On Or Off; To Change The Channel In Use - Midland FG-2 Owner's Manual

Operating the Radio

CAUTION: DON'T EXPOSE THE DISPLAY TO EXTREME HOT OR
COLD TEMPERATURE
1. Channel number: Displays channel number 1-22.
2. BUSY Symbol: Indicates activity on the channel.
3. TX Symbol: Indicates the unit is transmitting.
4. CTCSS Code: Displays the number of the code selected for the channel in use.
5. SCAN Symbol Indicates the scan mode is in use
6. CTCSS Symbol: Indicates a "Privacy" code is in use.
7. SAVE Symbol: Flashes indicating battery save is active.
8. Musical note indicates ROGER BEEP is on.
9. Key Symbol indicates when the keypad has been locked. Only the "PTT" and
"CALL" buttons are active when this indicator is on.
10. DW Symbol: Indicates Dual Watch channel selection is active.
11. VOX Symbol: Indicates "VOX" is activated
12. Battery symbol shows the battery condition. Replace or recharge the batteries
when this indicator displays 2 or fewer segments of the battery.
FEATURES AND LOCATION OF CONTOLS

TO TURN THE RADIO ON OR OFF

The ON/OFF/VOLUME control at the top of the radio controls power and volume. A
series of tones will be heard confirming that radio is working.

TO CHANGE THE CHANNEL IN USE

Press and release the channel button /\ or \/ to select the desired channel. To change
channel rapidly, press and hold the channel button /\ or \/ until the desired channel
appears on the display.

DISPLAY SYMBOLS

7