About The Sidelooker Feature; Fig. 3-21 Sidelooker Feature - Raymarine L750 Operating Handbook

58

About the Sidelooker Feature

Some installations include the optional "Sidelooker" transducer. The
Sidelooker feature is very helpful for certain kinds of fishing. The
transducer used with the Sidelooker transmits two beams. The two sides
of the Sidelooker page represent the port and starboard Sidelooker
beams. See Fig. 3-21. The Sidelooker feature allows you to check along
the sides of a stream or river. You can also look under the edge of a
bank or pier, or into a snag or shallow spot.
The Sidelooker information will not be displayed unless the Sidelooker
feature is turned on. To do this, go to the System Setup menu. Press
the Menu button, then choose the Soft Key for System Setup. Using the
up- and down-controls on the Trackpad, go to the line labeled Sidelook.
Use the left- and right-controls to turn the feature on and off.
Once the Sidelooker feature has been enabled, the unit can present an
additional display. See Fig. 3-22. When you press the Display button, a
fourth Soft Key allows access to the Sidelooker page

Fig. 3-21 Sidelooker Feature

L750 Fishfinder: Installation and Operation Handbook
31 beam
Fish
Boat
Fish
Sidelooker
transducer
11 beam aimed
down at 4 angle
Rock
Rock